咨询热线   021-5021 6996   /   021-5021 7007
首页 > 导师工作 > 导师介绍
张亮
时间:2018-09-28

教师介绍

 

教师姓名

张亮

职务职称

高级工程师(副教授级别)

研究方向

增材制造、材料基因组

联系电话

021-65556775-565;18201929108

E-mail

Lzhang0126@hotmail.com

通讯地址

上海市邯郸路99号4号楼4楼

个人简介

张亮,2013年博士毕业于荷兰代尔夫特理工大学,现任职于上海材料研究所,担任上海3D打印材料工程技术研究中心研发总监,主要从事金属3D打印、材料基因组等前沿科技的研究。入选上海市青年科技启明星计划、上海科学院/上海产业技术研究院“创新先锋”计划、虹口青年拔尖英才计划。目前担任上海材料研究所第十一届技术委员会委员和上海3D打印材料工程技术研究中心技术委员会委员,以及两本学术期刊编委。

近年来,张亮作为项目负责人,主持了上海市科委、上海科学院及上海材料所等多项科研课题,攻克一系列3D打印材料制件尖端技术,成功研发出航空、航天、模具用钛合金、高温合金、模具钢等3D打印用高品质金属粉末耗材。2017年团队参与成立了“中天上材增材制造有限公司”,相关技术转让金额达到2000万,积极推动着3D打印产业化进程。

主要论文、专利及著作情况

论文

1.张亮,吴文恒,卢林,倪晓晴,何贝贝,杨启云,祝国梁,顾芸仰,激光选区熔化热输入参数对Inconel 718合金温度场的影响研究,工程材料,2018,46(7):29-35;

2. J. Song, W.H. Wu,L. Zhang(通讯), B.B. He, L. Lu, X.Q. Ni, Q.L. Long and G.L. Zhu, Role of scanning strategy on residual stress distribution in Ti-6Al-4V alloy prepared by selective laser melting, Optik-Int. J. Light Electron. Opt. 2018, 170: 342-352;

3.J. Song, W.H. Wu, B.B. He, L. Lu, X.Q. Ni, Q.L. Long, T. Wang, G.L. Zhu andL. Zhang(通讯), Effect of processing parameters on the size of molten pool in GH3536 alloy during selective laser melting, IOP Confer. Ser.: Mater. Sci. Eng. 2018 ,Accepted;

4.B.B. He, W.H. Wu ,L. Zhang, Q.L. Long, K. Chang, Microstructural characteristic and mechanical property of Ti6Al4V alloy fabricated by selective laser melting, Vacuum, 2018.2.2, 150: 79-83;

5.X.Q. Ni, D.C. Kong, W.H. Wu,L. Zhang(通讯), C.F. Dong, B.B He, L. Lu, K.Q. Wu and D.X Zhu, Corrosion behaviour of 316L stainless steel fabricated by selective laser melting with different scanning speeds, Journal of Materials Engineering and Performance,2018,Accepted;

6. D.C. Kong, X.Q. Ni, C.F. Dong, L. Zhang, C. Man, J.Z. Yao, K. Xiao, X.G. Li. Heat treatment effect on the microstructure and corrosion behavior of 316L stainless steel fabricated by selective laser melting for proton exchange membrane fuel cells,Electrochimica Acta, 2018, Accepted;

7.D.C Kong, X.Q. Ni, C.F. Dong, X.W. Lei, L.Zhang, C.Man, J.Z Yao, X.Q. Cheng, X.G. Li. Bio-functional and anti-corrosive 3D printing 316L stainless steel fabricated by selective laser melting,Materials & Design,2018,152:88-101;

8.吴文恒,张亮(通讯),何贝贝,卢林,选择性激光熔化增材制造工艺过程模拟研究现状,理化检验-物理分册, 2016.10.05, 52(10): 693-697;

9.L. Zhang, D.G. Eskin, A. Miroux, T. Subroto and L. Katgerman: Influence of melt feeding scheme and casting parameters during direct-chill casting on microstructure of an AA7050 billet, Metall. Mater. Trans. B, 2012, 43(6), pp. 1565-1573;

10.L. Zhang, D.G. Eskin, A. Miroux, and L. Katgerman: Role of solute and transition metals in grain refinement of aluminum alloys under ultrasonic melt treatment, Proc. Of the 13th international conference on aluminum alloys, 2012, pp. 1389-1394;

11.L. Zhang, D.G. Eskin, A. Miroux, T. Subroto and L. Katgerman: Effect of inlet geometry on macrosegregation during the direct chill casting of 7050 alloy billets: experiments and computer modelling, IOP Conf. Ser.: Mater. Sci. Eng., 2012, 33, 012019, pp. 1-8;

12.L. Zhang, D.G. Eskin, A. Miroux, and L. Katgerman: Formation of microstructure in Al-Si alloys under ultrasonic melt treatment, Light Metals 2012: cast shop for Aluminum production, TMS2012, Warrendale, 2012, pp. 999-1004;

13.L. Zhang, D.G. Eskin, A. Miroux, and L. Katgerman: On the mechanism of the formation of primary intermetallics under ultrasonic melt treatment in an Al-Zr-Ti alloy, IOP Conf. Ser.: Mater. Sci. Eng. 2011, 27, 01200, pp.1-6;

14.L. Zhang, D.G. Eskin, and L. Katgerman: Influence of ultrasonic melt treatment on the formation of primary intermetallics and related grain refinement in aluminum alloys, J. Mater. Sci., 2011, 46(15), pp.5252-5259;

15.D.G. Eskin, T.V. Atamanenko,L. Zhang and L. Katgerman: Ultrasonic Treatment of Aluminum Alloys for Grain Refining, Proc. Of the 11th international aluminium conference, 2010, IOS Press, pp. 281-288;

16.T.V. Atamanenko, D.G. Eskin,L. Zhang and L. Katgerman: Criteria of Grain Refinement Induced by Ultrasonic Melt Treatment of Aluminum Alloys Containing Zr and Ti,Metall. Mater. Trans. A, 2010, 41A, pp. 2056-2066;

17.D.G. Eskin, T.V. Atamanenko,L. Zhang and L. Katgerman: On the mechanism of grain refinement by ultrasonic melt treatment in the presence of transition metals, Light Metals 2010:cast shop for Aluminum production, TMS2010, Warrendale, 2010, pp. 607-611;

18. L. Zhang, D.G. Eskin, M. Lalpoor and L. Katgerman: Factors affecting thermal contraction behavior of an AA7050 alloy, Mater. Sci. Eng. A, 2010, 527, pp. 3264-3270;

著作:

1. Liang Zhang , Ultrasonic Processing of Aluminum Alloys,荷兰Materials

innovation institute出版社,学术专著

 

主要科研项目

1.上海市青年科技启明星人才计划,大幅面钛合金3D打印过程热变形与裂纹控制关键技术研究,40万,在研,主持

2.上海产业技术研究院创新先锋人才计划,金属3D打印过热-力耦合行为模拟研究,2016/09-2017/08,20万,结题,主持

3.上海市研发平台专项,上海材料基因工程研究院(五),2016/11-2018/11,110万,在研,主持

4.上海材料研究所创新项目,基于材料基因组的3D打印材料设计与工艺改进,2016/07-2017/07,20万,结题,主持

5.上海青年科技英才扬帆计划,17YF1405400,金属3D打印过程中孔隙缺陷的形成机理与控制,2017.05-2020.04,20万,在研,参与

6.国家工信部工业强基工程,TC160Y310-19,金属粉末增材制造实施方案,2016/09-2019/08,500万,在研,参与

7.上海市工程中心建设项目,15DZ2251100,上海3D打印材料工程技术研究中心,2015/09-2017/08,200万,结题,参与

8.上海市科委重大专项,13DZ1108902,3D打印金属材料的开发、应用与评价体系研究,1000万,结题,参与

 

荣誉及获奖

1.2018年上海市青年科技启明星

2.2017年虹口青年拔尖英才

 

021-5021 6996
021- 5021 7007
版权所有 上海第二工业大学研究生部 地址:上海市浦东新区金海路2360号 邮编:201209